DGC-T TABLETOP PULSE OXIMETER ★. Three Parameters: SPO2, Pulse Rate, TEMP (Optional) ★. Waveform: SPO2 waveform (PLETH) Features: ★. Compact, small, light, easy for carrying and handling; ★. LED display of measurement and LCD display of PLETH; ★. Audio and visual alarm； ★. Storage and review of patient’s trend data up to 36 hours which is never lost even when power’s off; ★. Three kinds of power supply, AC Power, Build-in rechargeable Ni/MH battery and Common AA alkaline or rechargeable batteries; ★. Battery capacity indicator; ★. Automatic power-off； ★. Patient’s trend can be transmitted to a personal computer for display，saving and printing； ★. Suitable for adult, pediatric, and neonate patients; Applications: ● Table Pulse Oximeter can be applied in the hospital’s operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment. Standard Packing List: ■ Tabletop Pulse Oximeter main unit 1pc ■ Adult finger SpO2 sensor 1pc ■ AC power adaptor 1pc ■ Communication cable 1pc ■ The operator’s manual 1pc Selectable Accessory: ● Surface TEMP probe ● Child finger/toe SpO2 sensor ● H.S.Code: 90189090 ● Dimension: 160x148x85mm ● Net Weight: 0.5kg ● Gross Weight: 1kg ● Package Size: 245x185x100mm ● Color: Light blue 
Technical Specification: (1) General ● Monitoring Parameters: SPO2、PR、PLETH、Pulse strength、TEMP(Optional) ● Signal sockets: SPO2 socket、PR socket、TEMP socket(Optional)、adaptor socket、PC communication socket Display screen ● Type: 128×64 dot matrix homochromy LCD and Dual-color LED (red/green) ● LCD Display area: 46mm×32mm ● LED Display area: 35mm×58mm ● Backlight color: White ● LED: Dual-color LED (red/green) and homochromy LED (2) Features ● PLETH: The monitor can display PLETH waveform ● Audio and visual alarm: The speaker sounds the alarm and the parameter’s measurement flashes on the screen. ● Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch. ● Power saving: The monitor will automatic shut down when no monitoring for 3 minutes. ● Trend: The monitor saves parameter measurements every 2 seconds and can store trend data up to 36 hours. ● Data storage: The saved data will never be lost even if the monitor is powered off. ● Communication: Transmitting the patient’s trend to a PC for display, observation, saving and printing. (3) Electrical Specifications ● Working Voltage: DC 6.0V～9.0V AC power adaptor ● Input: AC 100～240V, 50/60Hz, 0.7A ● Output: DC 5V，3A Internal battery ● Type: 1.5Ahr/8.4V Li rechargeable battery ● Run Time: 15-hour continuous operation with a new, fully charged battery (environment temperature is 25℃) ● Recharge time: 5 hours ● Common 1.5V Battery ● Type: Five pieces of common 1.5V AA battery or rechargeable battery ● Run Time: More than 5-hour continuous operation with a new battery (environment temperature is 25℃) (4) Environment Temperature ● Operation: 0°C ~ 45 °C ● Transportation and storage: -20 °C ~ 60 °C Humidity ● Operation: 15% ~95 %(non-condensing) ● Transportation and storage: 10% ~ 95 % (non-condensing) Altitude ● Operation: 86KPa~106KPa ● Transportation and storage: 50KPa~106KPa (5) Parameter Specifications SPO2 ● Patient: Adult, child and neonate ● Range: 35%~100% ● Resolution: 1 % ● Accuracy: ±2 %(70% ~100%), Unspecified (0%~ 69%) PR ● Range: 30 bpm~250bpm ● Resolution: 1bpm ● Accuracy: ±2bpm TEMP（Optional） ● Channel: 1 ● Input: Body surface thermal-sensitive resistor temperature sensor ● Range: 0℃～50℃ ● Resolution: 0.1℃ ● Accuracy: ±0.2℃ | 
